1. Wash hands & sterilize all equipment following the bottle's manufacturer's instructions. 

2. Boil 1 litre of freshly run water & cool to approximately 40-50 degrees Celsius.
    Do not use artificially softened or repeatedly boiled water. 

3. Measure the required amount of water into a sterilized bottle (referring to the feeding guide below).

4. Using the scoop provided, add the correct number of scoops of powder (1 level scoop of power to each
     fluid ounce of water, approximately 30 millilitres). 
     Level off the powder using the scoop leveller (do not press the powder).

5. Place sterilized teat & cap on the bottle & shake well until all the powder has dissolved (approximately 15 seconds).

6. Cool to drinking temperature (approximately 37 Degrees Celsius) by holding the bottle under cold running
    water, & feed immediately.
    Always test the temperature of the milk before feeding.